Bona Premier Dealer — 6 Sara Street, Toronto , NSW — 1300 950 551
Log in Sign up
Cart (0)
Bona Wave 2K two-component floor finish — Sand-Aid, Toronto NSW

Bona Wave

$200.00

Bona Wave 2K — Genuine 2-Component Waterborne Floor Finish

Bona Wave 2K is a 2-component water-based polyurethane topcoat designed for heavy-duty residential and light-to-moderate commercial timber floors. It delivers genuine 2K durability — strong wear, scuff, scratch, and chemical resistance — without the complexity or VOC load of solvent-based systems. A clear, non-yellowing finish with fast recoat times and a practical pot life for full-floor applications.

Key Benefits

  • Genuine 2-component water-based PU — stronger than 1K systems for residential wear and light commercial
  • Strong resistance to wear, scuffing, scratching, and spills
  • Clear, non-yellowing — colour stays consistent over time
  • Low VOC, low odour — suitable for residential occupied sites with adequate ventilation
  • Fast recoat: 2–3 hours under normal conditions
  • Requires a compatible Bona primer on bare timber

Technical Snapshot

  • Type: 2-component water-based polyurethane
  • Mix ratio: Add Part B (hardener) by volume — stir thoroughly before use (refer to TDS for exact ratio)
  • Pot life: 4 hours at 20°C after mixing
  • Recoat time: 2–3 hours (20°C, 50% RH)
  • Light traffic: 24 hours | Full cure: 7 days under normal conditions
  • Coverage: 8–10 m² per litre per coat

Recommended System — Bare Timber

  1. Sand to a clean, uniform scratch profile
  2. Apply 1 coat compatible Bona primer:
    • Prime Classic UX — standard timber species, natural colouration
    • Prime Intense — high tannin species (Blackbutt, Tallowwood), richer colouration
    • Prime White — where a whitened appearance is required
  3. Inter-coat abrasion, then apply 2 coats Bona Wave 2K

Refer to the Bona Wave 2K Technical Data Sheet for full application conditions and inter-coat timing.

Wave 2K vs Traffic HD — Which One?

Wave 2K is suited to heavy residential and light-to-moderate commercial use. Bona Traffic HD is the specification for high traffic intensity commercial floors (retail, hospitality, public areas with heavy footfall). If your project is a quality home, apartment, or light commercial space — Wave 2K delivers strong 2K durability at the right level of spec without over-engineering the job.

Downloads

Common Questions

Is Wave 2K suitable for commercial floors?
Yes — for light to moderate commercial traffic. For high traffic intensity (retail, hospitality, public areas), Bona Traffic HD is the right spec.

Does it require mixing before use?
Yes — Part B (hardener) must be added to Part A and mixed thoroughly. Pot life is 4 hours at 20°C after mixing.

Do I need a primer?
Yes — a compatible Bona primer is required on bare timber. See Prime Classic UX (standard species) or Prime Intense (high tannin species).

How long before I can use the floor?
Light traffic after 24 hours; full cure in 7 days under normal conditions.

Complete the System